Author Topic: Cant update my frickin OS  (Read 10155 times)

0 Members and 1 Guest are viewing this topic.

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Cant update my frickin OS
« on: January 12, 2011, 11:01:54 pm »
Hi everyone
i cant seem to update my os at all.
i am using version 1.0 os and the old ndless.

when i use computer link software (i tried both newest and a fairly old one)
wen i update it downloads and almost finishes installing the os.
when it looks to almost filling the bar, it says 'error corrupted file'
I HAVE TRIED BOTH 1.7 AND 2.1
How do i upgrade my calculator???
school starts soon and everyone needs a at least 2.0 calc

Offline DJ Omnimaga

  • Clacualters are teh gr33t
  • CoT Emeritus
  • LV15 Omnimagician (Next: --)
  • *
  • Posts: 55941
  • Rating: +3154/-232
  • CodeWalrus founder & retired Omnimaga founder
    • View Profile
    • Dream of Omnimaga Music
Re: Cant update my frickin OS
« Reply #1 on: January 12, 2011, 11:18:20 pm »
Hi and welcome on the forums.

I assume that you really mean OS 1.0 and not 1.1, right? Because unfortunately if you have OS 1.0, this means you have a TI-Nspire CAS+ instead of a TI-Nspire CAS. The CAS+ was a prototype model that never officially got released, but was leaked on Ebay. This prototype cannot be upgraded at all, unlike the official TI-Nspire and TI-Nspire CAS+ calculator models. In other words, you might be screwed. :(

If 1.0 was a typo and you meant 1.1, then have you downloaded OS 1.7 and 2.1 from TI website and did you download the right file? For the CAS it ends in .tnc and for the regular TI-Nspire it ends in .tno.

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Re: Cant update my frickin OS
« Reply #2 on: January 13, 2011, 01:14:49 am »
i am using 1.1
actually both files i downloaded were tnc
i can't tno files with computer link software for some reason,
when i choose install os, it does not show tno files
i tried with both the new and old link software

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Re: Cant update my frickin OS
« Reply #3 on: January 13, 2011, 01:28:41 am »
my calculator is a ti nspire cas from officworkks
i still dont see why tnc files is corrupted. i have tried the one on my disk (1.7)
downloaded it multiply times from the website and they always end with the same result. maybe it is because i installed ndless? i deleted the ndless uninstaller a long time ago.
my ndless was the old one

Offline z80man

  • Casio Traitor
  • LV8 Addict (Next: 1000)
  • ********
  • Posts: 977
  • Rating: +85/-3
    • View Profile
Re: Cant update my frickin OS
« Reply #4 on: January 13, 2011, 01:31:07 am »
I hope you realize that if you upgrade to OS 2.1 ndless will no longer work due to a patch released by TI. Nor will you be able to downgrade your OS back to 1.1 or 1.7. Not that I encourage cheating, but you can pretty easily fool a teacher into thinking you have OS 2.1

List of stuff I need to do before September:
1. Finish the Emulator of the Casio Prizm (in active development)
2. Finish the the SH3 asm IDE/assembler/linker program (in active development)
3. Create a partial Java virtual machine  for the Prizm (not started)
4. Create Axe for the Prizm with an Axe legacy mode (in planning phase)
5. Develop a large set of C and asm libraries for the Prizm (some progress)
6. Create an emulator of the 83+ for the Prizm (not started)
7. Create a well polished game that showcases the ability of the Casio Prizm (not started)

Offline DJ Omnimaga

  • Clacualters are teh gr33t
  • CoT Emeritus
  • LV15 Omnimagician (Next: --)
  • *
  • Posts: 55941
  • Rating: +3154/-232
  • CodeWalrus founder & retired Omnimaga founder
    • View Profile
    • Dream of Omnimaga Music
Re: Cant update my frickin OS
« Reply #5 on: January 13, 2011, 03:06:52 am »
I hope you realize that if you upgrade to OS 2.1 ndless will no longer work due to a patch released by TI. Nor will you be able to downgrade your OS back to 1.1 or 1.7. Not that I encourage cheating, but you can pretty easily fool a teacher into thinking you have OS 2.1
Actually Ndless is being developed for OS 2.0.1 and 2.1 and it's possible to get rid of OS 2.1 by using Nleash 1.1.
my calculator is a ti nspire cas from officworkks
i still dont see why tnc files is corrupted. i have tried the one on my disk (1.7)
downloaded it multiply times from the website and they always end with the same result. maybe it is because i installed ndless? i deleted the ndless uninstaller a long time ago.
my ndless was the old one
Personally when I uninstalled Ndless I prefered to format the entire calc. I went to the maintenance menu and wiped everything including the OS, then I re-installed a new OS after rebooting the calc. I forgot the key combination to access the maintenance menu, though. Hopefully someone can help on your corrupted file issue.
« Last Edit: January 13, 2011, 03:10:51 am by DJ Omnimaga »

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Re: Cant update my frickin OS
« Reply #6 on: January 13, 2011, 06:10:22 am »
what is the hardest reset i can do to my cas? I want to completely wipe the os and restore to factory or even pre factory settings
the only reset i can find in the manual is the 3 second reset button.
yeah i think ill go 2.0.1 os.
my textbooks were written for that anyway.

I am not sure if my calculator still has ndless on it or not after the reset. I deleted the uninstaller without uninstalling the program lol :)
maybe that is causing all my problems.

also, my link software (both versions) wont recognize i have a calc plugged in unless i pull the usb out and in AFTER i open the program.

hmm i just read that i need to install an older one before i can upgrade to 2.1

how should i upgrade my calc?
so now ive fully formatted my calc and i need a link for 1.7 :)
the link stick has problems.
it starts of at 100kbps then drops to 10 and then stops and leaves me a mutilated half file.
« Last Edit: January 13, 2011, 06:35:05 am by sodium.777 »

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Re: Cant update my frickin OS
« Reply #7 on: January 13, 2011, 06:50:36 am »
woopee just installed 2.0.1!
and for some reason once i installed it a bar popped up on my screen saying installing 2.1.xx despite the fact i downloaded 2.0.1 on this website.

sneaky texas instruments.
though checking the status shows 2.0.1.60. maybe i just read it wrong
i guess i have to give up pokemon anyway since school is coming :(

still waiting on ndless 2.0.1 and gbc emulator update.

THANKS TO EVERYone!!!!11one!!
« Last Edit: January 13, 2011, 06:52:22 am by sodium.777 »

Offline jnesselr

  • King Graphmastur
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2270
  • Rating: +81/-20
  • TAO == epic
    • View Profile
Re: Cant update my frickin OS
« Reply #8 on: January 13, 2011, 07:09:13 am »
Hey, that's great that you got it to work, but please don't double post. :D

What is the key combo to get to the maintanence menu, btw?

Offline Silver Shadow

  • Beta Tester
  • LV8 Addict (Next: 1000)
  • ********
  • Posts: 817
  • Rating: +27/-7
    • View Profile
Re: Cant update my frickin OS
« Reply #9 on: January 13, 2011, 07:48:35 am »
BTW, you can safely install OS 2.1 as the new Ndless will work on it too. And you'll get the joy of overclocking it to the max! ;)
Former Coder of Tomorrow


Offline fb39ca4

  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1749
  • Rating: +60/-3
    • View Profile
Re: Cant update my frickin OS
« Reply #10 on: January 13, 2011, 05:52:07 pm »
Why? The only feature that was added in 2.1 was slider improvements :P, and it uses another mb of storage space. Sodium can use nover to overclock if he wants.

Offline willrandship

  • Omnimagus of the Multi-Base.
  • LV11 Super Veteran (Next: 3000)
  • ***********
  • Posts: 2953
  • Rating: +98/-13
  • Insert sugar to begin programming subroutine.
    • View Profile
Re: Cant update my frickin OS
« Reply #11 on: January 13, 2011, 05:53:43 pm »
Wait, 1.0? do you by chance have a CAS+? Those can't update at all. Sorry.

Otherwise, it might be that you need the boot2 1.4 file, I'm not sure if 1.7 has that or not. If that's the problem, let me know.

Oh, oops, fixed :P NVM

@graph On, home enter P for clickpad.
« Last Edit: January 13, 2011, 05:55:00 pm by willrandship »

Offline sodium.777

  • LV2 Member (Next: 40)
  • **
  • Posts: 30
  • Rating: +0/-0
    • View Profile
Re: Cant update my frickin OS
« Reply #12 on: January 13, 2011, 09:33:18 pm »
im using 2.0.1
so does ndless 1.7 work on it?
and what is the purpose of overclocking a calculatr?

Offline apcalc

  • The Game
  • CoT Emeritus
  • LV10 31337 u53r (Next: 2000)
  • *
  • Posts: 1393
  • Rating: +120/-2
  • VGhlIEdhbWUh (Base 64 :))
    • View Profile
Re: Cant update my frickin OS
« Reply #13 on: January 13, 2011, 09:55:04 pm »
Sadly, Ndless 1.7 does not work on OS 2.0.1

The current development version of Ndless, Ndless 2.0, will work on that OS, but binaries are not being distributed now.  In order to use it, you have to build it yourself.

The purpose of overclocking the Nspire would be to make it do stuff faster, essentially.  That is why TI uses it themselves in OS 2.1! :)


Offline DJ Omnimaga

  • Clacualters are teh gr33t
  • CoT Emeritus
  • LV15 Omnimagician (Next: --)
  • *
  • Posts: 55941
  • Rating: +3154/-232
  • CodeWalrus founder & retired Omnimaga founder
    • View Profile
    • Dream of Omnimaga Music
Re: Cant update my frickin OS
« Reply #14 on: January 16, 2011, 04:21:42 pm »
The purpose of overclocking the Nspire would be to make it do stuff faster, essentially.  That is why TI uses it themselves in OS 2.1! :)
Instead of actually not being lazy and optimizing the code to still run fast instead. <_<