Omnimaga

Calculator Community => TI Calculators => General Calculator Help => Topic started by: tonsils on November 11, 2013, 09:37:14 pm

Title: Nspire CAS buttons assigned to wrong functions
Post by: tonsils on November 11, 2013, 09:37:14 pm
I could use some serious help! I offered to update my friend's nspire CAS (touchpad model) to the new OS, because he was having trouble installing it. After some initial troubles, I managed to install the latest version of the OS by doing a complete formatting through the maintenance menu. However, upon turning on the calculator, nearly every button has been reassigned to a different function. After some messing around, I think I've determined that the calculator is stuck using the button mapping from the CAS clickpad model (the on/off button only works as such, and the doc button now acts as the home button). Because of this, I can no longer access the maintenance menu and install a different OS. Since the OS installed now is the latest version, I can't downgrade to a lower version through the nspire computer link software. I've tried various combinations to try to reach the maintenance menu, but I've had no luck.

Any suggestions? I'd hate to return the calculator with it being in worse shape than when I borrowed it.

EDIT: I'm now able to access the maintenance menu, but every reinstall of the OS results in the same button problem.
Title: Re: Cannot access nspire CAS maintenance menu
Post by: Legimet on November 11, 2013, 09:38:30 pm
Which OS did you upgrade to?
Title: Re: Cannot access nspire CAS maintenance menu
Post by: tonsils on November 11, 2013, 09:39:39 pm
Which OS did you upgrade to?

3.2.3.1233
Title: Re: Cannot access nspire CAS maintenance menu
Post by: Legimet on November 11, 2013, 09:45:49 pm
You can downgrade from 3.2.3.1233 to 3.1. Just send the 3.1 as a regular OS upgrade. Never install anything above 3.2.3.1233 until it's possible to downgrade (it may take a long time for this to be possible).
Title: Re: Cannot access nspire CAS maintenance menu
Post by: DJ Omnimaga on November 11, 2013, 09:47:33 pm
Have you found the keys that now has the DOC, EE and ENTER functions? It might be worth trying the combination of these threes then hold them down while pressing ON and stuff. Else, you could try what is now HOME, ENTER and P, which was the original ClickPad version of the key combo to access this mode from what I can remember.
Title: Re: Cannot access nspire CAS maintenance menu
Post by: tonsils on November 11, 2013, 09:55:13 pm
Have you found the keys that now has the DOC, EE and ENTER functions? It might be worth trying the combination of these threes then hold them down while pressing ON and stuff. Else, you could try what is now HOME, ENTER and P, which was the original ClickPad version of the key combo to access this mode from what I can remember.
After a lot of trial and error, I finally got the right button combination and was able to format again. Any recommendations on which OS to install now?
Title: Re: Cannot access nspire CAS maintenance menu
Post by: Legimet on November 11, 2013, 09:59:22 pm
Install 3.1, which is the best since it gives you Ndless.
http://ti-planet.org/forum/archives_voir.php?id=3720 (Telecharger is download)
Title: Re: Cannot access nspire CAS maintenance menu
Post by: tonsils on November 11, 2013, 10:09:28 pm
Well, I have a problem. After installing 3.1, the buttons are still assigned to the wrong functions. I'm at least able to consistently access the Maintenance options, but I'm not sure where to go from there. It seems as though that during the installation process, all of the buttons work perfectly fine, as well as the touchpad, but as soon as I reach the home menu, things go awry.
Title: Re: Nspire CAS buttons assigned to wrong functions
Post by: rick999 on December 22, 2013, 03:03:07 pm
Hi tonsils,
i'm having the same problem, have you managed to solve the problem ?