Omnimaga
Calculator Community => TI Calculators => General Calculator Help => Topic started by: Adrenaline on February 12, 2012, 05:28:40 am
-
So for some reason my calculator just keeps on restarting, and I don't know how to stop it. Can anyone help me? It has a normal screen then a screen with a clock symbol. Help me! D:
-
Whether caused by Ndless or not, try to follow its troubleshooting guide, "the TI-Nspire falls into a reboot loop": http://ndlessly.wordpress.com/ndless-troubleshooting/
-
I've tried to take the battery back out and put it back in, but it doesn't work. It still gets to the screen with the clock icon and restarts again. When I pressed the key combination it says,
"Please replace the battery and try again. Press any button to power off."
-
The section I was pointing you to is about reinstalling the OS from the maintenance menu, did you this? How did it go?
Does anyone know what this message is about? Adrenaline, was this message also displayed before removing and putting back your battery?
-
I've tried to take the battery back out and put it back in, but it doesn't work. It still gets to the screen with the clock icon and restarts again. When I pressed the key combination it says,
"Please replace the battery and try again. Press any button to power off."
Yes, the maintenance menu doesn't start if your batteries are too low.
-
Yes the message was displayed when before I removed my battery. I'm going to let it charge for now and see if I can bring the maintenance menu up.
-
Let us know how it goes, a user of Ndless was having the same issue as yours.
-
Is there a way to turn it completely off? As soon as I plug it in it just restarts and when I unplug it, it turns off.
-
Can't you let it charge on the maintenance's menu message "Please replace the battery and try again. Press any button to power off."?
-
No, if I let it hang on the maintenance menu message, it just turns off automatically.
-
Then this is a serious design flaw of the TI-Nspire...
Can you check if it could be charged from the diags menu? Hold the the following keys at boot time: Esc+Menu+Minus
-
Ok so the diag menu works.. Do I do anything there, or just leave it to charge?
-
Yes, leave it charge there. Then reinstall the OS from the maintenance menu
-
I don't think its charging... when I unplug it, it just turn off, and back on when I plug it back in.
-
Did you let it charge long enough?
Would it be possible for you to borrow another battery and reinstall the OS with it? I see no other solution.
-
It could be the battery that is defective actually, although less likely. If I remember it takes about 4 hours to charge, right?
-
Would I be able to take it back? I have warranty on it.
-
my calculator had the same problem
i charged my calculator for months and my calculator said
"Os not found, reinstall"
-
Critor posted the ultimate recovery topic on this exact problem :
http://tiplanet.org/forum/viewtopic.php?f=15&t=8866&p=121403#p121403 (http://tiplanet.org/forum/viewtopic.php?f=15&t=8866&p=121403#p121403)
-
Could it be translated? Most users who have the problem don't speak French, and automated translations aren't really good.
-
Yeah it would be nice actually. In the calc help forum and maybe the tutorials section of the site.
-
I'm having the exact same problem with my nspire CX and im not sure what to do
-
I'm having the exact same problem with my nspire CX and im not sure what to do
http://ndlessly.wordpress.com/ndless-troubleshooting/
search for "The TI-Nspire falls into a reboot loop"
-
Ok i fixed the reboot loop (THANK YOU FOR YOUR HELP :thumbsup: ) and now im having trouble installing ndless on my nspire cx i had to download the OS 3.1.0.392 off of ti planet.org and that is installed, i also downloaded ndless 3.1 and I made a seperate folder for it on the student software for the ndless_resources but whenever i drag the ndless installer 3.1 in the folder it appears on my handheld that it is installed then it reboots and the computer says "EXPERIENCED A PROBLEM WHILE COMMUNICATING WITH THE HANDHELD. A RETRY MAY BE SUCCESSFUL", now im not sure what to do next.
-
Ok i fixed the reboot loop (THANK YOU FOR YOUR HELP ;D(http://www.omnimaga.org/Themes/default/images/gpbp_arrow_up.gif) ) and now im having trouble installing ndless on my nspire cx i had to download the OS 3.1.0.392 off of ti planet.org and that is installed, i also downloaded ndless 3.1 and I made a seperate folder for it on the student software for the ndless_resources but whenever i drag the ndless installer 3.1 in the folder it appears on my handheld that it is installed then it reboots and the computer says "EXPERIENCED A PROBLEM WHILE COMMUNICATING WITH THE HANDHELD. A RETRY MAY BE SUCCESSFUL", now im not sure what to do next.
This is absolutly a normal behavior.
-
I'm having the exact same problem with my nspire CX and im not sure what to do
http://ndlessly.wordpress.com/ndless-troubleshooting/
search for "The TI-Nspire falls into a reboot loop"
Mega Bump
So, I bought a "new" Nspire CX from Ebay and I am experiencing the reboot loop. I have it charging right now. So far this topic has been very helpful. I'm going to sticky it, and I'll post an update later on my progress. :)
*edit* Success! I now have OS 3.1 installed. You guys are the best! :D