Omnimaga

General Discussion => Introduce Yourself! => Topic started by: Eleven on June 04, 2011, 08:10:51 am

Title: Hello
Post by: Eleven on June 04, 2011, 08:10:51 am: Hi everybody.

I've been programming TiBasic quite some time now, and feel there are few challenges left there.

so I decided to start learning assembly (yeey)
I started with "hotdog's tutorial" (which brought me here btw) a week ago, and continued today with the "28-day-guide".
for now everything is pretty clear, but I'm sure when things get harder, I will spend much time on the forum asking questions or searching for more info...

I'm from Belgium, so i speak Dutch and English fluently and understand French also.
I noticed a Dutch copy of the terms of agreement, is there a Dutch community here? If not no worries, English suits me fine.

thats it for a short introduction i guess,...
Title: Re: Hello
Post by: Ashbad on June 04, 2011, 08:14:04 am: Hello, Eleven! Cool to see another BASIC coder here :D

Good luck with your assembly adventures, and enjoy your stay here at omnimaga! :)
Title: Re: Hello
Post by: ruler501 on June 04, 2011, 08:28:45 am: Welcome. I don't know of a Dutch community, but we have people who speak most languages. Good luck with assembly I hear it gets hard but I've never tried.

Here are your peanuts for increased calc speed (http://www.omnimaga.org/index.php?action=dlattach;topic=4454.0;attach=3295;image)
Title: Re: Hello
Post by: Munchor on June 04, 2011, 08:51:34 am: Welcome Eleven, I hope you like Omnimaga, I'm sure you will :D
Title: Re: Hello
Post by: Jim Bauwens on June 04, 2011, 09:00:02 am: Heya Eleven!
I'm also Belgium, and there are a couple more users from Belgium and The Netherlands :)

I wish you good luck with asm!
Title: Re: Hello
Post by: turiqwalrus on June 04, 2011, 09:25:13 am: Welcome to omni, Eleven!
here are your (normal) peanuts:
!peanuts
I will be looking forward to your contributions here ;D
Title: Re: Hello
Post by: ruler501 on June 04, 2011, 11:36:47 am: Quote from: turiqwalrus on June 04, 2011, 09:25:13 am
Welcome to omni, Eleven!
here are your (normal) peanuts:
!peanuts
I will be looking forward to your contributions here ;D
Why would he need normal peanuts. This is a calc site give him the peanuts to make calcs run faster(especially TI-89 Titaniums)
Title: Re: Hello
Post by: ztrumpet on June 04, 2011, 11:50:37 am: Quote from: Eleven on June 04, 2011, 08:10:51 am
I noticed a Dutch copy of the terms of agreement, is there a Dutch community here? If not no worries, English suits me fine.
We used to have a Dutch board set up like our French one, but it was closed due to lack of interest. It would go months between each post sometimes. :-\

Welcome to Omnimaga, Eleven. I hope you enjoy your time here, and also good luck with learning Asm. :)
Title: Re: Hello
Post by: Deep Toaster on June 04, 2011, 11:54:26 am: Quote from: ruler501 on June 04, 2011, 11:36:47 am
Why would he need normal peanuts. This is a calc site give him the peanuts to make calcs run faster(especially TI-89 Titaniums)

It's only three KHz faster (http://www.ticalc.org/archives/news/articles/1/15/15975.html)... Not much of a difference.

Welcome to Omnimaga, 11. Enjoy your peanuts :D
Title: Re: Hello
Post by: ruler501 on June 04, 2011, 12:21:44 pm: Quote from: Deep Thought on June 04, 2011, 11:54:26 am
Quote from: ruler501 on June 04, 2011, 11:36:47 am
Why would he need normal peanuts. This is a calc site give him the peanuts to make calcs run faster(especially TI-89 Titaniums)

It's only three KHz faster (http://www.ticalc.org/archives/news/articles/1/15/15975.html)... Not much of a difference.

Welcome to Omnimaga, 11. Enjoy your peanuts :D
Thats a giant difference lol
Title: Re: Hello
Post by: Deep Toaster on June 04, 2011, 12:41:08 pm: 3 KHz means the difference between 10 MHz and 10.003 MHz :P
Title: Re: Hello
Post by: ruler501 on June 04, 2011, 12:46:31 pm: I know
Title: Re: Hello
Post by: Anima on June 04, 2011, 01:15:58 pm: Welcome! Hope you will have a lot of fun here at Omnimaga. :)
By the way, what calculators do you own?
Title: Re: Hello
Post by: Eleven on June 04, 2011, 01:43:19 pm: oh yeah I forgot to mention that: i (only) own a Ti84+ calc.

thx for the warm welcome, and the peanuts (i guess =D)
Title: Re: Hello
Post by: DJ Omnimaga on June 04, 2011, 05:46:31 pm: Heya and welcome on the forums! I hope you enjoy your stay (along with programming). :D

Feel free to ask questions when you need to. :)

Also we used to have a dutch speaking sub-forum, but nobody used it :( (even if we had like 10 dutch members back then). We got a French sub-forum, though.
Title: Re: Hello
Post by: ruler501 on June 04, 2011, 05:49:33 pm: This community is good for almost anything you can think of. Once you are here for a while you will become part of our close knit group of members that is always willing to except more. If you have a project or a question you can almost always post it on omni and get a good answer for it

EDIT:those projects/questions can be about pretty much anything
Title: Re: Hello
Post by: pianoman on June 04, 2011, 05:51:15 pm: And it doesn't have to be just about calculators... :)
Welcome to the site!
Title: Re: Hello
Post by: ben_g on June 04, 2011, 06:20:01 pm: Welcome to the forums.

btw: I'm from Belgium too and I also speak dutch, But i guess most people can understand my English too.
Title: Re: Hello
Post by: Stefan Bauwens on June 05, 2011, 02:27:15 pm: Welcome. I'm from Belgium too. :)
Have some of my peanuts:
(http://www.omnimaga.org/index.php?action=dlattach;topic=4454.0;attach=7071;image) (http://ourl.ca/9466)
Click to eat...
Title: Re: Hello
Post by: JustCause on June 05, 2011, 08:59:10 pm: Welcome. Hope you enjoy your stay!