Author Topic: HP Prime Hardware Details (of a DVT Prototype)  (Read 10811 times)

0 Members and 1 Guest are viewing this topic.

Offline Adriweb

  • Editor
  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1708
  • Rating: +229/-17
    • View Profile
    • TI-Planet.org
HP Prime Hardware Details (of a DVT Prototype)
« on: August 09, 2013, 08:14:52 am »
Hi everyone,

Unlike the fx-CP400 which gave us a hard time (easy when you know the trick... ;) ), the HP Prime opens quite "easily" and reveals us its hardware:


We notice the references which were already at the back of our prototype: EA656MB for the motherboard and EA656KB for the keyboard and power board.

They include:
  • Touch Color Display 3.5" diagonal with a resolution of 320x240px
  • Processor (U101): Samsung S3C2416XH-40 - ARM9 clocked at 400 MHz maximum.
  • RAM Memory (U200): Hynix H5MS2562NFR - 32 MB
  • Flash Memory (U201): Samsung K9F2G08U0C-SCB0 - 256 MB
  • Battery: Li-Ion 3.7V, 1500 mAh (5.55Wh)
In short, a fairly standard and simple architecture around three main distinct chips: RAM/ROM CPU.

Let’s now look at the details ;)

Processor :
  • Architecture : ARM (ARM9 ; 32 bit)
  • Core : ARM926EJ-S
  • Manufacturer  : Samsung
  • Reference : S3C2416
  • Specs : 16KB I-cache; 16KB D-cache/MMU
  • Frequency : 2 Modes : 266 MHz and 400 MHz
  • Note : Features 2D Acceleration
  • Official "Product Brief" (PDF)
RAM Memory :
  • Type : DDR SDRAM
  • Manufacturer  : Hynix
  • Reference : H5MS2562NFR E3M
  • Capacity : 32 MB (256Mb (x16 device) = 4M x 4Bank x 16 I/O)
  • Manufacturer  Page officielle
  • Datasheet (Closest JFR model)
Flash Memory :
  • Type : Flash NAND
  • Manufacturer  : Samsung
  • Reference : K9F2G08U0C SCB0
  • Capacity : 256 MB (2 Gb)
  • Datasheet
Screen
  • Type : TFT
  • Manufacturer  : ?
  • Reference : ?
  • Dimensions : 3.5" (8,9 cm)
  • Resolution : 320×240 px
  • Pixel density : 114 ppi
  • Color : Yes , 16-bit;
  • Other : Capacitive multi-touch layer
Battery :
  • Type : Rechargeable Battery
  • Technology: Lithium-Ion
  • Manufacturer : WiseWod Tehnology Co.
  • Reference : 484461AR
  • IEC 61960 Number : 1ICP6/51/63
  • Dimensions : 4.8 * 43.8 * 61 mm
  • Nominal voltage  : 3.7 V
  • Max. capacity : 1500 mAh
  • Energy: 5.55 Wh
  • Impedance : <= 60 m?

     
    In short, only documented and standard chips instead of proprietary ones or hidden in an ASIC, which is a nice change from the TI-Nspire or even more from the fx-CP400 :)

    This calculator is positioning itself as a potential competitor to the TI-Nspire CX, as we wrote in our hands-on review (Omni topic) and the hardware confirms this idea, despite a slight weakness in the RAM amount.
    In fact, some people already think of a Prime emulator on the Nspire and a Nspire one on the Prime, given the similar architecture! (But first, the machine will have to be open to native development ;) )

    You can also compare the technical specs of the CX and the Prime with our comparator :
    http://tiplanet.org/forum/compare.php?nspirecxcas,prime


    See you later :)

    Source : http://tiplanet.org/forum/viewtopic.php?f=55&t=12821&lang=en
    « Last Edit: August 09, 2013, 09:25:54 am by adriweb »
    My calculator programs
    TI-Planet.org co-admin.
    TI-Nspire Lua programming : Tutorials  |  API Documentation

    Offline Streetwalrus

    • LV12 Extreme Poster (Next: 5000)
    • ************
    • Posts: 3821
    • Rating: +80/-8
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #1 on: August 09, 2013, 08:55:21 am »
    Core : ARM926EJ-S
    Exactly the same as the Nspire. This means that it'll be easy to port Nspire ASM programs to the Prime (only hardware differences i.e. keyboard and LCD will have to be fixed). :D And also even write a game for both platforms at the same time.

    Offline pimathbrainiac

    • Occasionally I make projects
    • Members
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1731
    • Rating: +136/-23
    • dagaem
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #2 on: August 09, 2013, 09:37:14 am »
    I really hope the price point is less than the CX, the 84 C, the 84, and the PRISM. If HP can add some good competition to the mass market, then we might just get our calcs down under $100 MSRP.
    « Last Edit: August 09, 2013, 09:37:30 am by pimathbrainiac »
    I am Bach.

    Offline Adriweb

    • Editor
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1708
    • Rating: +229/-17
      • View Profile
      • TI-Planet.org
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #3 on: August 09, 2013, 09:41:49 am »
    Hmm sorry :x The price is set to be about 155 $/€
    « Last Edit: August 09, 2013, 09:42:12 am by adriweb »
    My calculator programs
    TI-Planet.org co-admin.
    TI-Nspire Lua programming : Tutorials  |  API Documentation

    Offline pimathbrainiac

    • Occasionally I make projects
    • Members
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1731
    • Rating: +136/-23
    • dagaem
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #4 on: August 09, 2013, 09:43:57 am »
    Darn it. I think it's a bit high to compete with the CX (which MSRP's at $129, I think).

    That said, it's right about where the ti-89 is (I think). maybe it's trying to compete in the college market and not the HS market...
    « Last Edit: August 09, 2013, 09:55:16 am by pimathbrainiac »
    I am Bach.

    Offline Adriweb

    • Editor
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1708
    • Rating: +229/-17
      • View Profile
      • TI-Planet.org
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #5 on: August 09, 2013, 11:27:02 am »
    Darn it. I think it's a bit high to compete with the CX (which MSRP's at $129, I think).
    Eh... It's much higher here...
    So who knows how the price can be outside of Europe for the Prime if they really want to compete hard.
    My calculator programs
    TI-Planet.org co-admin.
    TI-Nspire Lua programming : Tutorials  |  API Documentation

    Offline pimathbrainiac

    • Occasionally I make projects
    • Members
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1731
    • Rating: +136/-23
    • dagaem
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #6 on: August 09, 2013, 11:34:05 am »
    Anyway, my parents won't let me buy any new calcs with my own money, so if/when they'll let me, it's going to be a tough choice as to which calc I should buy.
    I am Bach.

    Offline timwessman

    • LV3 Member (Next: 100)
    • ***
    • Posts: 94
    • Rating: +32/-0
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #7 on: August 09, 2013, 03:53:35 pm »
    Anyway, my parents won't let me buy any new calcs with my own money, so if/when they'll let me, it's going to be a tough choice as to which calc I should buy.

    Well, you should tell them my story. :-)

    I was known in high school as the calculator guy. I was the one sitting there writing programs and knew everything about them. Even though I hated TI calcs with a passion and only was an HP only guy, the teachers still came to me with questions on things. I wrote some comparison documents, and some other things.

    In school, I started a business with a land surveyor using the 50g as the main cpu/internal guts. I did all the software on it. (http://stakemill.wordpress.com/2008/02/05/precision-survey-solutions-dc50-data-collectors/). We did a few business plan competitions. Took home money from several of them including Fortune Small Business (http://marriottschool.byu.edu/cet/news/article?id=307, http://money.cnn.com/magazines/fsb/fsb_archive/2006/11/01/8391418/), and Rice University.

    Did that for about 2 years or so until HP hired me in the calc group. Been here almost 5 years now.

    Also, I met my wife due to one of those comparison documents I mentioned. Her dad was looking for a calculator for his daughter who was starting engineering courses. Her dad and I kept in touch, and later on I met her and we now have 2 kids.  :-)

    Learning programming on memory restricted, slower devices gives you an amazing capability and flexibility missing from many professional software developers. You gain an understanding of how and why things work in a way many new developers never get. Granted, if you do nothing but web stuff it may not be incredibly useful, but in my time here at HP I've definitely seen how that start I had has made me much more flexible and able to jump in on all types of tasks and be productive much quicker even in areas I've not had experience with before.

    TW
    « Last Edit: August 09, 2013, 03:57:40 pm by timwessman »
    TW

    Although I work for the HP calculator group, the comments and opinions I post here are my own.

    Offline pimathbrainiac

    • Occasionally I make projects
    • Members
    • LV10 31337 u53r (Next: 2000)
    • **********
    • Posts: 1731
    • Rating: +136/-23
    • dagaem
      • View Profile
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #8 on: August 09, 2013, 03:57:31 pm »
    To be better explained, I program my 84 and 89 in class, and they want me to not be distracted. Quite frankly, they're right on that one, but it still doesn't keep me from wanting those calcs.
    I am Bach.

    Offline Juju

    • Incredibly sexy mare
    • Coder Of Tomorrow
    • LV13 Extreme Addict (Next: 9001)
    • *************
    • Posts: 5730
    • Rating: +500/-19
    • Weird programmer
      • View Profile
      • juju2143's shed
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #9 on: August 10, 2013, 01:46:37 am »
    Yup, the specs seems eerily similar to the Nspire's but with more memory, so if HP opens up native development without too much hassle kinda like Casio (and unlike TI), that would be pretty awesome.

    Remember the day the walrus started to fly...

    I finally cleared my sig after 4 years you're happy now?
    THEGAME
    This signature is ridiculously large you've been warned.

    The cute mare that used to be in my avatar is Yuki Kagayaki, you can follow her on Facebook and Tumblr.

    Offline Lionel Debroux

    • LV11 Super Veteran (Next: 3000)
    • ***********
    • Posts: 2135
    • Rating: +290/-45
      • View Profile
      • TI-Chess Team
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #10 on: August 10, 2013, 02:27:32 am »
    Quote
    but with more memory
    Compared to the CX, twice the amount of NAND Flash, but half the amount of RAM, which is sad...

    Quote
    so if HP opens up native development without too much hassle kinda like Casio (and unlike TI), that would be pretty awesome.
    Yeah.

    TI is far too entrenched in the US education system for anyone else to make a significant dent into the US education market, but the Prime is bound to gain following among calculator enthusiasts, especially if native code programming is reasonably accessible.
    The Prime has a window of opportunity over the next school season, as TI didn't release an upgrade to the Nspire series, and the Casio fx-CP400 flat out sucks on hardware and software characteristics while being astonishingly expensive. After that, I guess that the "CX Premium", as it appeared through an unrelated event during a TI webinar, will hit the market. Its hardware specs / software abilities had better be a generation above the Prime's (Cortex-A5 or -A7, 128+MB RAM, etc.)...
    Member of the TI-Chess Team.
    Co-maintainer of GCC4TI (GCC4TI online documentation), TILP and TIEmu.
    Co-admin of TI-Planet.

    Offline DJ Omnimaga

    • Clacualters are teh gr33t
    • CoT Emeritus
    • LV15 Omnimagician (Next: --)
    • *
    • Posts: 55941
    • Rating: +3154/-232
    • CodeWalrus founder & retired Omnimaga founder
      • View Profile
      • Dream of Omnimaga Music
    Re: HP Prime Hardware Details (of a DVT Prototype)
    « Reply #11 on: August 10, 2013, 02:31:49 am »
    Quote
    but with more memory
    Compared to the CX, twice the amount of NAND Flash, but half the amount of RAM, which is sad...

    Quote
    so if HP opens up native development without too much hassle kinda like Casio (and unlike TI), that would be pretty awesome.
    Yeah.

    TI is far too entrenched in the US education system for anyone else to make a significant dent into the US education market, but the Prime is bound to gain following among calculator enthusiasts, especially if native code programming is reasonably accessible.
    Also the fact that BASIC is so fast might get even more people interested since many people here on Omni prefer BASIC to ASM/C due to finding it easier to code for, but are repelled by the slow speed of TI-84+ BASIC and especially Casio BASIC.