Omnimaga

Omnimaga => News => Topic started by: DJ Omnimaga on March 15, 2014, 05:42:19 pm

Title: Ndless 3.6 becomes reality!
Post by: DJ Omnimaga on March 15, 2014, 05:42:19 pm
Users of TI-Nspire OS 3.6, rejoice! Ndless 3.6 is now live, after months and months of work!

ndless.me (http://ndless.me/)
Tutorial (thanks to TI-Planet) (http://tiplanet.org/forum/viewtopic.php?f=57&t=14087&lang=en)
First of all, to use it, make sure that you have OS 3.6 installed. Version 3.6.550 or 3.6.546 will do. In case TI ever updates to an higher OS, do not upgrade, else you could permanently lose the ability to use Ndless 3.6! To make things easier, links to every TI-OSes are available here (http://tiplanet.org/forum/archives_list.php?multi_chaine_search=(v%203.6.0.550)), in case TI ever removes any link to OS 3.6 on their website in the future.

Most Ndless 3.1 programs should run fine in Ndless 3.6. Only the ones which uses hard-coded routines will most likely fail.

So after over a year of wait, every calculator are now Ndlessable again! At least, for now... but even if it gets locked again, it is still amazing news what ExtendeD and the Ndless team did, because several calculators, including many now available in stores, are currently running OS 3.6. Thanks a lot to everyone who helped contribute to this amazing achievement! :thumbsup:

Like every software, Ndless 3.6 might have bugs, so make sure that after making sure you have installed Ndless properly, to report them to the Ndless team as soon as you run into them.

Sources: ExtendeD on #omnimaga (http://chat.eeems.ca:9003/?server=irc.omnimaga.org%206667&channel=omnimaga&date=Sat%20Mar%2015%202014#1394917475188),  TI-Planet (http://tiplanet.org/forum/viewtopic.php?t=14086&p=159156#p159156) and Ndless 3.6 website (http://ndless.me/)

Also, as mentionned on TI-Planet (http://tiplanet.org/forum/viewtopic.php?t=14084&p=159154#p159154), a new version of nLaunchy (2.4) is out too! It lets you run multiple OSes on one calc, as well as Linucx.
Title: Re: Ndless 3.6 becomes reality!
Post by: Juju on March 15, 2014, 06:22:24 pm
Yaay~! This is another great day for the community.
Title: Re: Ndless 3.6 becomes reality!
Post by: bb010g on March 15, 2014, 06:24:31 pm
Props to ExtendeD, Excale, and everyone else on the Ndless 3.6 team!
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 15, 2014, 07:03:41 pm
does it support gba  and gbc emulators and nlaunch


edit: i forgot to say yaaaaaaay the ndless team did it again :D

Title: Re: Ndless 3.6 becomes reality!
Post by: critor on March 15, 2014, 07:07:04 pm
Quote from: The_King (hking1) on March 15, 2014, 07:03:41 pm
does it support gba  and gbc emulators and nlaunch

Check the list of Ndless 3.1 programs which have been updated or need to be updated for Ndless 3.6:
http://tiplanet.org/forum/viewtopic.php?t=14086&p=159156#p159156

If the program you're thinking about is not in those lists, then it works directly. ;)
Title: Re: Ndless 3.6 becomes reality!
Post by: Aspiring on March 15, 2014, 08:15:58 pm
WHOOOOO!!!!!  :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t:

SO AWESOME!!! I need to make sure I get a nspire before another update. :)
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 15, 2014, 08:27:14 pm
its a relief really, especially since i had been nlaunching 3 oses: 3.1cx cas, 3.2cx cas and 3.6 cx

now there will be more space since i will remove 3.1 :D
Title: Re: Ndless 3.6 becomes reality!
Post by: bb010g on March 15, 2014, 08:38:25 pm
Why do you need 3.2 w/ CAS and 3.6 w/o? Couldn't you just use 3.6 w/ CAS?
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 15, 2014, 08:42:49 pm
Quote from: Aspiring on March 15, 2014, 08:15:58 pm
WHOOOOO!!!!!  :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t:

SO AWESOME!!! I need to make sure I get a nspire before another update. :)

i wish u luck in finding a compatible nspire :D

Quote from: bb010g on March 15, 2014, 08:38:25 pm
Why do you need 3.2 w/ CAS and 3.6 w/o? Couldn't you just use 3.6 w/ CAS?
i have a nspire cx and not cx cas and usually need cas, except for exams ;)
Title: Re: Ndless 3.6 becomes reality!
Post by: Aspiring on March 15, 2014, 08:49:25 pm
Quote
Quote from: The_King (hking1) on March 15, 2014, 08:42:49 pm
Quote from: Aspiring on March 15, 2014, 08:15:58 pm
WHOOOOO!!!!!  :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t:

SO AWESOME!!! I need to make sure I get a nspire before another update. :)

i wish u luck in finding a compatible nspire :D

Just want to be sure if i get a non-cas ti-nspire cx between hardware revisions a - i  I will be able to use nLaunch to run os 3.6 cas right?
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 15, 2014, 08:54:58 pm
Quote from: Aspiring on March 15, 2014, 08:49:25 pm
Quote
Quote from: The_King (hking1) on March 15, 2014, 08:42:49 pm
Quote from: Aspiring on March 15, 2014, 08:15:58 pm
WHOOOOO!!!!!  :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t: :w00t:

SO AWESOME!!! I need to make sure I get a nspire before another update. :)

i wish u luck in finding a compatible nspire :D

Just want to be sure if i get a non-cas ti-nspire cx between hardware revisions a - i  I will be able to use nLaunch to run os 3.6 cas right?


u got that rite

edit: :D
Title: Re: Ndless 3.6 becomes reality!
Post by: Legimet on March 15, 2014, 10:27:09 pm
Great job! :)

I installed nLaunchy 2.4 along with Ndless 3.6 on one of my Nspires.
Title: Re: Ndless 3.6 becomes reality!
Post by: Hayleia on March 16, 2014, 07:39:33 am
Quote from: The_King (hking1) on March 15, 2014, 08:27:14 pm
its a relief really, especially since i had been nlaunching 3 oses: 3.1cx cas, 3.2cx cas and 3.6 cx

now there will be more space since i will remove 3.1 :D
You don't necessarily want to remove 3.1 since it has less bugs, is faster (except about Lua images), and gives you more RAM, according to that post (http://tiplanet.org/forum/viewtopic.php?t=14085&p=159155).
Title: Re: Ndless 3.6 becomes reality!
Post by: nspireguy on March 16, 2014, 09:08:01 am
yes!!!!!!!!!! this is what i have been waiting for!!!!!!!

but i have one question: should we use 3.1 if we still have it instead of 3.6?
Title: Re: Ndless 3.6 becomes reality!
Post by: Hayleia on March 16, 2014, 02:49:07 pm
Just read my post above yours. And don't forget about the English flag on the top right-hand corner on TI Planet to translate contents in English when available.
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on March 16, 2014, 04:32:28 pm
Quote from: nspireguy on March 16, 2014, 09:08:01 am
yes!!!!!!!!!! this is what i have been waiting for!!!!!!!

but i have one question: should we use 3.1 if we still have it instead of 3.6?

I'm using ndless 3.6 on my cx cas and I've got to say it's still pretty smooth. I do however have a switcher pack between 3.2 and 3.6 for easier calculations. You can download that here.
http://tiplanet.org/forum/archives_voir.php?id=35310 (http://tiplanet.org/forum/archives_voir.php?id=35310)
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 05:18:49 pm
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...
Title: Re: Ndless 3.6 becomes reality!
Post by: Vogtinator on March 16, 2014, 05:22:22 pm
Quote
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...
What? I don't understand what you wrote...
The latest Nover version should work fine, as it doesn't have any os-specific code in it IIRC.
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 05:26:55 pm
Quote from: Vogtinator on March 16, 2014, 05:22:22 pm
Quote
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...
What? I don't understand what you wrote...
The latest Nover version should work fine, as it doesn't have any os-specific code in it IIRC.

I just got Ndless 3.6 on my Ti-Nspire CX Cas, and I tried installing nover the same way I did before (Made a startup folder in ndless and put nover.tns inside) then restarted it.
But my calculator won't allow me to open it... so I was wondering if this new Ndless wasn't compatible with it, or if I did something wrong.
Title: Re: Ndless 3.6 becomes reality!
Post by: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 05:31:35 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.

just to add to it:
    open ndless installer again and press menu :D
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?
Title: Re: Ndless 3.6 becomes reality!
Post by: Hayleia on March 16, 2014, 05:34:54 pm
Here (http://tiplanet.org/forum/viewtopic.php?t=14090) is a tutorial to make Ndless 3.6 reboot proof.
Also, welcome to Omnimaga NeonS4, you can introduce yourself here (http://www.omnimaga.org/introduce-yourself!/) (tell us for example if you like Smash Bros ;) )
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 05:36:55 pm
Quote from: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new launch even if u only keep only 1 os in it (instead of two) because nlaunch installs at every reboot :D

follow hayleia’s post above mine ^^^


in other news:

i think this is the hottest topic rite now :D
Title: Re: Ndless 3.6 becomes reality!
Post by: Hayleia on March 16, 2014, 05:37:25 pm
Quote from: The_King (hking1) on March 16, 2014, 05:36:55 pm
Quote from: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.
Title: Re: Ndless 3.6 becomes reality!
Post by: DJ Omnimaga on March 16, 2014, 06:07:57 pm
Aah I didn't know Ndless 3.6 wasn't reboot-proof. I have an old hardware, though, so nLaunchy 2.4 would probably do the job for me. :P
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 06:31:41 pm
Quote from: Hayleia on March 16, 2014, 05:37:25 pm
Quote from: The_King (hking1) on March 16, 2014, 05:36:55 pm
Quote from: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
I don't understand what its telling me to do... parent folder file?

Edit: I tried dragging the nlauch.tcc file onto the root of my calculator but it returns to the "Operating System not found. Install OS now."
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 06:34:01 pm
Quote from: NeonS4 on March 16, 2014, 06:31:41 pm
Quote from: Hayleia on March 16, 2014, 05:37:25 pm
Quote from: The_King (hking1) on March 16, 2014, 05:36:55 pm
Quote from: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?



u have cx cas

so u go to cx section

then cas
 
then nlaunch.tcc

drag that file to the software :D
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 06:37:42 pm
Quote from: The_King (hking1) on March 16, 2014, 06:34:01 pm
Quote from: NeonS4 on March 16, 2014, 06:31:41 pm
Quote from: Hayleia on March 16, 2014, 05:37:25 pm
Quote from: The_King (hking1) on March 16, 2014, 05:36:55 pm
Quote from: NeonS4 on March 16, 2014, 05:34:14 pm
Quote from: Vogtinator on March 16, 2014, 05:29:36 pm
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?



u have cx cas

so u go to cx section

then cas
 
then nlaunch.tcc

drag that file to the software :D

I did that, but I return to "Operating System not found. Install OS now." error message. An error message also appears on my computer saying I should try again...

Another error which happens is that my Calculator just keeps going lighter and I have to reset it.
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 06:39:45 pm
Quote
I did that, but I return to "Operating System not found. Install OS now." error message. An error message also appears on my computer saying I should try again…


shut the software and try it again till u get it :)
Title: Re: Ndless 3.6 becomes reality!
Post by: nspireguy on March 16, 2014, 06:40:39 pm
ncapture doesnt work on 3.6. just so you know
Title: Re: Ndless 3.6 becomes reality!
Post by: critor on March 16, 2014, 06:41:34 pm
Quote from: NeonS4 on March 16, 2014, 06:31:41 pm
Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?

Edit: I tried dragging the nlauch.tcc file onto the root of my calculator but it returns to the "Operating System not found. Install OS now."

When you're reading this, on the computer you should be in a 'CAS' or 'non-CAS' subfolder.
So you go back to its parent folder where you'll find the required file.

If the calculator goes back to the "OS not found" string, then something went wrong.
You should restart part D.
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 06:42:38 pm
Quote from: nspireguy on March 16, 2014, 06:40:39 pm
ncapture doesnt work on 3.6. just so you know
yeah its hooks but doesn’t work :(
Title: Re: Ndless 3.6 becomes reality!
Post by: critor on March 16, 2014, 06:46:51 pm
Quote from: NeonS4 on March 16, 2014, 05:18:49 pm
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...

Nover works. :)
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 06:47:55 pm
Quote from: critor on March 16, 2014, 06:46:51 pm
Quote from: NeonS4 on March 16, 2014, 05:18:49 pm
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...

Nover works. :)

he didn’t know that he had reinstall ndless Critor :P
Title: Re: Ndless 3.6 becomes reality!
Post by: NeonS4 on March 16, 2014, 06:49:05 pm
Quote from: critor on March 16, 2014, 06:41:34 pm
Quote from: NeonS4 on March 16, 2014, 06:31:41 pm
Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?

Edit: I tried dragging the nlauch.tcc file onto the root of my calculator but it returns to the "Operating System not found. Install OS now."

When you're reading this, on the computer you should be in a 'CAS' or 'non-CAS' subfolder.
So you go back to its parent folder where you'll find the required file.

If the calculator goes back to the "OS not found" string, then something went wrong.
You should restart part D.
I repeated part D and it worked ;D Finally...
Thanks! :D
Title: Re: Ndless 3.6 becomes reality!
Post by: nspireguy on March 16, 2014, 06:52:24 pm
should i upgrade to ndless3.6 or keep useing ndless3.1?
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 16, 2014, 06:55:47 pm
Quote from: nspireguy on March 16, 2014, 06:52:24 pm
should i upgrade to ndless3.6 or keep useing ndless3.1?

ndless 3.1 is more stable and allows more ram, but ndless 3.6 allows lua features to work side by side

i suggest ndless 3.1/ndless 3.6 pack :P
Quote from: NeonS4 on March 16, 2014, 06:49:05 pm
Quote from: critor on March 16, 2014, 06:41:34 pm
Quote from: NeonS4 on March 16, 2014, 06:31:41 pm
Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?

Edit: I tried dragging the nlauch.tcc file onto the root of my calculator but it returns to the "Operating System not found. Install OS now."

When you're reading this, on the computer you should be in a 'CAS' or 'non-CAS' subfolder.
So you go back to its parent folder where you'll find the required file.

If the calculator goes back to the "OS not found" string, then something went wrong.
You should restart part D.
I repeated part D and it worked ;D Finally...
Thanks! :D
yay finally :D
Title: Re: Ndless 3.6 becomes reality!
Post by: Streetwalrus on March 16, 2014, 06:57:33 pm
I don't feel that excited about it. It's nice, but if Ndless 3.1 is still maintained I'll hold back.
Has the CX to CX CAS conversion been fixed in Nlaunchy ? 'Cause if it hasn't then I'm not even considering 3.6.
Title: Re: Ndless 3.6 becomes reality!
Post by: critor on March 16, 2014, 08:09:51 pm
@The_King (hking1) Great ! :D
Any comment on the tutorial ?
You're one of the first one to use it, so it would be quite useful to improve it for future users.

@Streetlrus
No, you still cannot Nlaunch OS 3.6 CAS on a non-CAS Nspire.
Title: Re: Ndless 3.6 becomes reality!
Post by: Streetwalrus on March 17, 2014, 01:39:32 am
Meh. I have another CAS calc and Xcas on my phone but I liked the Nspire's CAS. Gonna get an HP Prime anyway since I have teh moneyz. :3 That way I won't need the Nspire's CAS anymore (didn't use my Nspire nor any other calc in a while though, we don't need them that much in prépa).
Title: Re: Ndless 3.6 becomes reality!
Post by: DJ Omnimaga on March 17, 2014, 11:51:12 am
Yeah personally if Ndless 3.6 programs released in the future continue working on Ndless 3.1, I'll probably stick to the smaller OS 3.1 until I have some time to install nLaunchy and ensure that Ndless 3.6 won't need to be re-installed every reboot.

The great thing, though, is that now every calc can use Ndless again and almost all of them can also be nLaunched too (just hardware J and K can't, but there's now a way to get more freedom on those calcs too at http://tiplanet.org/forum/viewtopic.php?p=159231&lang=en )
Title: Re: Ndless 3.6 becomes reality!
Post by: Jim Bauwens on March 17, 2014, 12:28:27 pm
Since you can install Ndless 3.6 without a computer (just reopen the installer) I don't really think that it's such a big issue. So J and K devices are still pretty free in my opinion :)
Title: Re: Ndless 3.6 becomes reality!
Post by: DJ Omnimaga on March 17, 2014, 12:30:15 pm
Yeah I mean it's more of an annoyance, but also in my case Ndless 3.1 still does the job pretty fine, as well as the smaller OS 3.1 compared to 3.6. I will most likely switch in the near future when I have extra free time, though.
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 17, 2014, 12:36:07 pm
Quote from: critor on March 16, 2014, 08:09:51 pm
@The_King (hking1) Great ! :D
Any comment on the tutorial ?
You’re one of the first one to use it, so it would be quite useful to improve it for future users.

I think the tutorial is getting better and better with each version :D

on the side note:
    with the new ndless, it is possible to keep the official tns running, while u open unofficial files :)
Title: Re: Ndless 3.6 becomes reality!
Post by: Sorunome on March 17, 2014, 01:19:24 pm
This is great news!
I hope to see some more awesome nspire stuff coming out :)
Title: Re: Ndless 3.6 becomes reality!
Post by: ExtendeD on March 17, 2014, 02:15:27 pm
I hope too :) This new version will focus on getting the TI-Nspire development community back.
If anyone of you is willing to help us build a series of development tutorials covering major domains (console, nSDL, USB, OS hooks, ...), contact me.
Title: Re: Ndless 3.6 becomes reality!
Post by: Dapianokid on March 17, 2014, 06:08:16 pm
I'm the late one to post, but I installed ASAP. Of course, in my haste, I didn't remember to fix my nLaunch businesses or even to put OS 3.6 on my calc... :P Now it's all working fine. I can finally use Lua oncalc and play Advanced Wars 2 without having to reboot! :D
I was going to ask what the new exploit was, b-buh...
Title: Re: Ndless 3.6 becomes reality!
Post by: Aspiring on March 18, 2014, 02:34:51 pm
Quote from: critor on March 16, 2014, 08:09:51 pm
@Streetlrus
No, you still cannot Nlaunch OS 3.6 CAS on a non-CAS Nspire.

What is the latest cas os that a non-cas cx can run?
Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 18, 2014, 02:43:39 pm
Quote from: Aspiring on March 18, 2014, 02:34:51 pm
Quote from: critor on March 16, 2014, 08:09:51 pm
@Streetlrus
No, you still cannot Nlaunch OS 3.6 CAS on a non-CAS Nspire.

What is the latest cas os that a non-cas cx can run?
3.2 cas can be used with nlaunch if ur hardware revision is not J+
Title: Re: Ndless 3.6 becomes reality!
Post by: Aspiring on March 18, 2014, 04:19:16 pm
Quote from: The_King on March 18, 2014, 02:43:39 pm
Quote from: Aspiring on March 18, 2014, 02:34:51 pm
Quote from: critor on March 16, 2014, 08:09:51 pm
@Streetlrus
No, you still cannot Nlaunch OS 3.6 CAS on a non-CAS Nspire.

What is the latest cas os that a non-cas cx can run?
3.2 cas can be used with nlaunch if ur hardware revision is not J+

are there any cas features that os 3.6 has that os 3.2 doesn't have?
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on March 18, 2014, 10:51:28 pm
Quote from: Aspiring on March 18, 2014, 04:19:16 pm
are there any cas features that os 3.6 has that os 3.2 doesn't have?

I don't think so. I think it's just colours and formats that are changed a little. Check out here for more details

http://www.omnimaga.org/news/new-ti-nspire-os-3-6-with-extra-lockdown/


Title: Re: Ndless 3.6 becomes reality!
Post by: The_King on March 19, 2014, 08:38:03 pm
Quote from: Springyboy on March 18, 2014, 10:51:28 pm
Quote from: Aspiring on March 18, 2014, 04:19:16 pm
are there any cas features that os 3.6 has that os 3.2 doesn't have?

I don't think so. I think it's just colours and formats that are changed a little. Check out here for more details

http://www.omnimaga.org/news/new-ti-nspire-os-3-6-with-extra-lockdown/



don’t forget the boot programming and anti- ndless stuff
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on March 20, 2014, 02:12:16 am
Quote from: The_King on March 19, 2014, 08:38:03 pm
Quote from: Springyboy on March 18, 2014, 10:51:28 pm
Quote from: Aspiring on March 18, 2014, 04:19:16 pm
are there any cas features that os 3.6 has that os 3.2 doesn't have?

I don't think so. I think it's just colours and formats that are changed a little. Check out here for more details

http://www.omnimaga.org/news/new-ti-nspire-os-3-6-with-extra-lockdown/



don’t forget the boot programming and anti- ndless stuff

They just meant the cas features, in terms of calculating things not the programming side. Anyway you can downgrade from 3.6 to 3.2.3 with ndless and nlaunchy
Title: Re: Ndless 3.6 becomes reality!
Post by: ordelore on April 09, 2014, 06:21:25 pm
Quote from: DJ Omnimaga on March 15, 2014, 05:42:19 pm
Also, as mentionned on TI-Planet (http://tiplanet.org/forum/viewtopic.php?t=14084&p=159154#p159154), a new version of nLaunchy (2.4) is out too! It lets you run multiple OSes on one calc, as well as Linucx.
How might one determine what HW revision someone has? My CX says 2109010383 P-1211D
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on April 09, 2014, 10:32:23 pm
You've got a d version cx and it should still be able to run ndless 3.1 as well as multiple oses via nlaunchy (I've got an h version model which runs 3.2/3.6).
Title: Re: Ndless 3.6 becomes reality!
Post by: Streetwalrus on April 10, 2014, 12:55:16 am
Yeah, the last letter is the revision.
Title: Re: Ndless 3.6 becomes reality!
Post by: gnmmarechal on April 16, 2014, 06:19:25 pm
Quote from: The_King on March 15, 2014, 08:27:14 pm
its a relief really, especially since i had been nlaunching 3 oses: 3.1cx cas, 3.2cx cas and 3.6 cx

now there will be more space since i will remove 3.1 :D

First, could u tell me how u dual booted the CAS OS and the non-CAS OS?

Second, I won't update yet. First, because I don't like having to apply this each time I boot my calculator, second because ThemeEditor doesn't work with this yet.
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on April 17, 2014, 10:55:18 pm
Quote from: gnmmarechal on April 16, 2014, 06:19:25 pm
First, because I don't like having to apply this each time I boot my calculator

Using nlaunchy 2.4, everytime the cx is rebooted ndless is automatically installed. Saves a lot of time!
Quote from: gnmmarechal on April 16, 2014, 06:19:25 pm
First, could u tell me how u dual booted the CAS OS and the non-CAS OS?

To do this, just go here http://www.omnimaga.org/general-calculator-help/installing-cas-on-ti-nspire-cx-non-cas/msg360050/#msg360050 and follow the instructions

Download 3.2.3.1233 from here http://tiplanet.org/forum/archives_voir.php?id=9675 and download computer link software 3.2 from here http://tiplanet.org/forum/archives_voir.php?id=5489

This is not compatible with 3.6, only 3.1/3.2

Enjoy!
Title: Re: Ndless 3.6 becomes reality!
Post by: ordelore on April 27, 2014, 05:11:31 pm
I posted this also on TI-Planet.
it seems to me that the OS included in the 3.6/3.1 switching pack does not allow custom ndless.cfg files. Can I do this in any way?
Title: Re: Ndless 3.6 becomes reality!
Post by: Springyboy on April 27, 2014, 05:48:45 pm
Quote from: ordelore on April 27, 2014, 05:11:31 pm
I posted this also on TI-Planet.
it seems to me that the OS included in the 3.6/3.1 switching pack does not allow custom ndless.cfg files. Can I do this in any way?
The extensions required have already been put into ndless 3.6. Just download that from here http://www.ndless.me and there's nothing to worry about. Custom files are not required
Title: Re: Ndless 3.6 becomes reality!
Post by: macanhhao on May 19, 2014, 12:00:22 am
How to downgrade Ti-Nspire CX 3.6 (Non CAS)  to 3.2 CAS O.S

Current:
- Ti-Nspire CX 3.6 (non CAS)
Now, You want to downgrade Ti-Nspire CX CAS 3.2. Ok!

Step 1: Download [ nLaunchy 3.2/3.6 switching pack ]
Link: http://tiplanet.org/forum/viewtopic.php?f=57&t=13213 (http://tiplanet.org/forum/viewtopic.php?f=57&t=13213)

Extract: NL_3.2-3.6_switchpack\TI-Nspire CX\ndless
- Send : the  [ndless] folder =>>> Ti Calculator
- On Ti Calc / Open [ My Documents ]  //// you see   [ndless] folder.  pess Enter 'ndless_installer' and then [ Y ]
After that, press [ 2] and [ 2 ] ....and [ 0 ] to complete installation.
Exit


Step 2: Download ROM 3.2 Ti-Nspire CX CAS
- Run file: TNOC_en.exe  Link: http://tiplanet.org/forum/archives_voir.php?id=1922&short=1 (http://tiplanet.org/forum/archives_voir.php?id=1922&short=1)
check Delete boot2
- Rename new file: TI-NspireCXCAS-3.2.3.1233_b.tcc to [ phoenix.tns ]- Copy file:  phoenix.tns to [ NL_3.2-3.6_switchpack\TI-Nspire CX\non-CAS\nlaunch ] on PC.......overwrite
- Copy [ nlaunch ] folder in [ NL_3.2-3.6_switchpack\TI-Nspire CX\non-CAS\nlaunch ] to Ti Calculator
- Press [ Reset ] button back: Operating system not found. Install now.
- Connect and copy file:  nlaunch.tco  in ( NL_3.2-3.6_switchpack\TI-Nspire CX ) on PC. It will reboot

Waiting and using

Note:
If there're troubles. You should do:
1.  Press and Hold (4 keys): Doc + Enter + Ee and Release [Reset] Button
[ 2 ] and [ 1 ] ....and then [Enter]
You can install new OS

2. With fail belong to NSC MP V4 Diag (http://www.omnimaga.org/general-calculator-help/nsc-mp-v4-diag/msg352563/#msg352563). You can do:
Press and Hold (4keys): Esc + Menu+-and Release [Reset] Button to disable diag test

3. Everything...You can do:
Release [ Battery rechagreable ] about 3 - 5 second to clear fail


Thanks!
I'm from Vietnam. So i don't write Ennglish well. Sorry!
You can send my Email: [email protected]
Title: Re: Ndless 3.6 becomes reality!
Post by: Streetwalrus on May 19, 2014, 12:50:19 am
Is it possible that you do not spam this post everywhere ? Thank you.
Title: Re: Ndless 3.6 becomes reality!
Post by: 123outerme on May 19, 2014, 04:55:29 pm
Quote from: Streetwalrus on May 19, 2014, 12:50:19 am
Is it possible that you do not spam this post everywhere ? Thank you.
I believe it's a spambot, so that might be a "no".
This bot is actually kinda pointless, now that I think about it.
Title: Re: Ndless 3.6 becomes reality!
Post by: Streetwalrus on May 19, 2014, 04:57:10 pm
Not necessarily a spambot. He posted in very specific threads and it's accurate info.
Title: Not successful Installation
Post by: itslutfi on May 20, 2014, 12:39:08 pm
Hi I am a newbie and need your help on upgrading my TI Nspire Non-Cas  :)

I had tried every instruction and it seems what hold me back from successfully implementing Ndless + nlaunchy (both newest version) is the Diag protocol - after installing Ndless, my calc wont load the OS inside the /nlaunch folder  :-[

(I have tried everything, try CAS .tns files in the folder -I use NL.3.1-3.6.Switchpack and 3.2-3.6 ones-, non-CAS .tns files, download and modify .tco, and .tcs file myself using TNOC, rename it into phoenix.tns) if I only copy phoenix files not phoenix.old.tns one it will change into phoenix.old.tns automatically and OS wont load as consequence)  :'(

When Diag screen appear I go into option nomber 0 and test the battery pack, when I restart it continues loading OS but wont succefully load it. (If I dont test battery pack even if I restart it keeps on going into Diag)

why did I get Diag? probably because during Ndless installation I pressed 2 -2 - 0 and then 5-8-0 (this 5-8-0 prioritizes Diag over boot2) I tried Esc+Menu+(-) and it didnt work for me.  ._.

I tried esc+menu+(+) out of desperation it shows bug PP12D on te upper left corner of the screen I dont know what the hotkey means nor what the bug means :'(

the screen stays at loading and won't change even if you wait for hours *.*

it frustates me, because I need CAS program. I dont ask you to provide me info to change non-Cas to Cas if it violates the law or rule in this forum. :-[

I ask you to help me why wont my TI nspire successfully load the program as it should be. :)

(additional Info, I cant managed to press 2 -delete OS- if I pressed Menu+Enter+EE button, instead I picked 4 -total format- and continue from there everytime)

Huge Thanks everyone ;)