Author Topic: Ndless 3.6 becomes reality!  (Read 45726 times)

0 Members and 1 Guest are viewing this topic.

Offline Springyboy

  • LV2 Member (Next: 40)
  • **
  • Posts: 33
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #15 on: March 16, 2014, 04:32:28 pm »
yes!!!!!!!!!! this is what i have been waiting for!!!!!!!

but i have one question: should we use 3.1 if we still have it instead of 3.6?

I'm using ndless 3.6 on my cx cas and I've got to say it's still pretty smooth. I do however have a switcher pack between 3.2 and 3.6 for easier calculations. You can download that here.
http://tiplanet.org/forum/archives_voir.php?id=35310

Offline NeonS4

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 6
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #16 on: March 16, 2014, 05:18:49 pm »
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...

Offline Vogtinator

  • LV9 Veteran (Next: 1337)
  • *********
  • Posts: 1193
  • Rating: +108/-5
  • Instruction counter
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #17 on: March 16, 2014, 05:22:22 pm »
Quote
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...
What? I don't understand what you wrote...
The latest Nover version should work fine, as it doesn't have any os-specific code in it IIRC.

Offline NeonS4

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 6
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #18 on: March 16, 2014, 05:26:55 pm »
Quote
Will Nover work on this? I tried putting it on Ndless 3.6 but it said it only reads tns files... but the nover file was a tns file...
What? I don't understand what you wrote...
The latest Nover version should work fine, as it doesn't have any os-specific code in it IIRC.

I just got Ndless 3.6 on my Ti-Nspire CX Cas, and I tried installing nover the same way I did before (Made a startup folder in ndless and put nover.tns inside) then restarted it.
But my calculator won't allow me to open it... so I was wondering if this new Ndless wasn't compatible with it, or if I did something wrong.

Offline Vogtinator

  • LV9 Veteran (Next: 1337)
  • *********
  • Posts: 1193
  • Rating: +108/-5
  • Instruction counter
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #19 on: March 16, 2014, 05:29:36 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.

Offline The_King

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 247
  • Rating: +6/-2
  • Ⓣⓗⓔ Ⓖⓐⓜⓔ ⓍⒹ
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #20 on: March 16, 2014, 05:31:35 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.

just to add to it:
    open ndless installer again and press menu :D

Offline NeonS4

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 6
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #21 on: March 16, 2014, 05:34:14 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

Offline Hayleia

  • Programming Absol
  • Coder Of Tomorrow
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3367
  • Rating: +393/-7
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #22 on: March 16, 2014, 05:34:54 pm »
Here is a tutorial to make Ndless 3.6 reboot proof.
Also, welcome to Omnimaga NeonS4, you can introduce yourself here (tell us for example if you like Smash Bros ;) )
I own: 83+ ; 84+SE ; 76.fr ; CX CAS ; Prizm ; 84+CSE
Sorry if I answer with something that seems unrelated, English is not my primary language and I might not have understood well. Sorry if I make English mistakes too.

click here to know where you got your last +1s

Offline The_King

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 247
  • Rating: +6/-2
  • Ⓣⓗⓔ Ⓖⓐⓜⓔ ⓍⒹ
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #23 on: March 16, 2014, 05:36:55 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new launch even if u only keep only 1 os in it (instead of two) because nlaunch installs at every reboot :D

follow hayleia’s post above mine ^^^


in other news:

i think this is the hottest topic rite now :D
« Last Edit: March 16, 2014, 05:39:31 pm by The_King (hking1) »

Offline Hayleia

  • Programming Absol
  • Coder Of Tomorrow
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3367
  • Rating: +393/-7
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #24 on: March 16, 2014, 05:37:25 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.
I own: 83+ ; 84+SE ; 76.fr ; CX CAS ; Prizm ; 84+CSE
Sorry if I answer with something that seems unrelated, English is not my primary language and I might not have understood well. Sorry if I make English mistakes too.

click here to know where you got your last +1s

Offline DJ Omnimaga

  • Clacualters are teh gr33t
  • CoT Emeritus
  • LV15 Omnimagician (Next: --)
  • *
  • Posts: 55941
  • Rating: +3154/-232
  • CodeWalrus founder & retired Omnimaga founder
    • View Profile
    • Dream of Omnimaga Music
Re: Ndless 3.6 becomes reality!
« Reply #25 on: March 16, 2014, 06:07:57 pm »
Aah I didn't know Ndless 3.6 wasn't reboot-proof. I have an old hardware, though, so nLaunchy 2.4 would probably do the job for me. :P

Offline NeonS4

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 6
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #26 on: March 16, 2014, 06:31:41 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?

Edit: I tried dragging the nlauch.tcc file onto the root of my calculator but it returns to the "Operating System not found. Install OS now."
« Last Edit: March 16, 2014, 06:34:30 pm by NeonS4 »

Offline The_King

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 247
  • Rating: +6/-2
  • Ⓣⓗⓔ Ⓖⓐⓜⓔ ⓍⒹ
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #27 on: March 16, 2014, 06:34:01 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?



u have cx cas

so u go to cx section

then cas
 
then nlaunch.tcc

drag that file to the software :D

Offline NeonS4

  • LV1 Newcomer (Next: 20)
  • *
  • Posts: 6
  • Rating: +0/-0
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #28 on: March 16, 2014, 06:37:42 pm »
Ndless 3.6 isn't reboot-proof. You have to install it everytime after you rebooted.
I see what you mean... do you know when this will get fixed?

as far i know it is fixed if u have the new nlaunch even if u only keep only os in it (instead of two) because nlaunch installs at every reboot :D
The tutorial I linked to explains this.

Thanks for the link, after I get to step D8 and the message "Operating System not found. Install OS now." appears what do I do?
D8) Send then the parent folder file matching your calculator model:
  • CX CAS:   'nlaunch.tcc'
  • CX:   'nlaunch.tco'
  • CAS:   'nlaunch.tnc'
  • Nspire:   'nlaunch.tno'
I don't understand what its telling me to do... parent folder file?



u have cx cas

so u go to cx section

then cas
 
then nlaunch.tcc

drag that file to the software :D

I did that, but I return to "Operating System not found. Install OS now." error message. An error message also appears on my computer saying I should try again...

Another error which happens is that my Calculator just keeps going lighter and I have to reset it.
« Last Edit: March 16, 2014, 06:39:30 pm by NeonS4 »

Offline The_King

  • LV5 Advanced (Next: 300)
  • *****
  • Posts: 247
  • Rating: +6/-2
  • Ⓣⓗⓔ Ⓖⓐⓜⓔ ⓍⒹ
    • View Profile
Re: Ndless 3.6 becomes reality!
« Reply #29 on: March 16, 2014, 06:39:45 pm »
Quote
I did that, but I return to "Operating System not found. Install OS now." error message. An error message also appears on my computer saying I should try again…


shut the software and try it again till u get it :)