This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - alex10819
1
« on: March 03, 2011, 01:53:28 am »
It's just a miniUSB male to USB male cable connected to a USB female to USB male cable that I spliced together. My soldering skills are crap though :-/
2
« on: March 03, 2011, 01:46:04 am »
Well, DMX is a fairly simple packet to generate. You have 512 channels, and each one is just one byte. So you're just broadcasting 512 bytes per frame, at a minimum of 100 frames per second. TI-BASIC can't quite push this out, but I hacked it into working by making the ASM lib loop what it broadcasted at 100FPS, and only changing one channel at a time. Since the program can only affect one channel at a time anyway, this means I'm generating maybe 5 FPS, and the ASM lib is broadcasting a loop for the rest without too much of a problem.
3
« on: March 03, 2011, 01:40:21 am »
Possibly, it's not quite done yet. I'm still having issues with the frame rate being a little too slow, it causes a flicker in RGB enabled lights, and it occasionally goes insane and sets all the channels to full (YAY EPILEPSY)
I've actually used it in small shows at a local venue, but it doesn't quite replace a dedicated lighting console or PC.
4
« on: March 03, 2011, 01:35:33 am »
Wow, that's actually quite cool! Is it in assembly?
Also, may I suggest wrapping the video in [youtube] tags so that we don't have to leave to watch it?
Done, and as it says in the first post, it's TI-BASIC with a small ASM lib. TI-BASIC can't send frames to the USB fast enough, and the lights interpret it as data corruption and ignore it.
5
« on: March 03, 2011, 01:31:28 am »
Just wanted to show you guys the demo of this program I've been working on for a while. It allows you to control 64 channels of DMX512 through a TI84 (Needs the USB to output fast enough). In case you don't know what DMX512 is, it's the protocol used to control stage lighting. This is completely written in TI-BASIC, with a small ASM lib to utilize the USB port efficiently.
6
« on: December 29, 2005, 09:51:00 am »
well, i ruled out post count... hey kevin, if/when you read this, perhaps you should look up the money formula  
7
« on: December 29, 2005, 09:32:00 am »
i'm getting 17 each time... perhaps it's based off some obscure variable...
8
« on: December 29, 2005, 09:05:00 am »
waah... i wanna see it so bad... i got the whole season of Firefly for christmas, i want the movie so bad...
9
« on: December 29, 2005, 08:39:00 am »
ooh... i missed alot... eeep
10
« on: December 08, 2005, 10:53:00 am »
well then, use !get ticonnectCH.zip
11
« on: December 08, 2005, 10:19:00 am »
You may remember the Omnimaga version of TI-Connect? well, i'm now releasing it to the general public. To get your free copy, get on IRC and join #omnimaga. If "Alex10819" or "AlexHelp" is online, type "!get ticonnectomni.zip", and accept the DCC request. To run the omnimaga TI-connect, unzip it, then double click it... it will work no matter where it is on your system. thanks, and have fun  
12
« on: December 08, 2005, 10:07:00 am »
you would expect that to be 1000, but ah well... that means only the author can get the special edition
13
« on: December 03, 2005, 12:39:00 pm »
ugh... i'm glad this is over...
the current status:
I've been unbanned/unadmined at CMP... however, unbeknownst to him, i'm a secret admin... but i'm not abusing my powers
WCM is still banned from CH...
WCM is banned from all CG run IRC channels, including #calchaven
WCM is quitting IRC because of Hawthorne...
---------
with any luck, this means it's all over...
14
« on: December 03, 2005, 12:33:00 pm »
wow... i gotta look into using this...
15
« on: December 03, 2005, 12:29:00 pm »
i can explain that in one word: "spambot"
notice the siggy? it's similar to what happened to my guestbook...
|
Show Posts
