Omnimaga
Calculator Community => Major Community Projects => Super Smash Bros. Open => Topic started by: ImZealot on November 18, 2014, 02:56:03 pm
-
(I just finished writing a post saying basically the same as this, but more info about my situation in TI-84 programs/apps, and when I posted it some error about my IP came up and I lost all I had written that took me at more than 10 minutes. :mad: )
Hey guys, I'm having some trouble transfering the game to my TI-84 Plus Silver Edition.
This is what happens:
Pressing "Send to Device" (http://i.gyazo.com/1a55c8e874637736da067282ed06b659.mp4)
After some seconds, these windows appear (http://i.gyazo.com/68ae29db5ad17f539ab8df985d32b617.mp4).
Any idea on what to do? Thanks a lot.
-
1: check if the calculator is turned on when you send the files, because otherwise it won't send
2: otherwise, check if the usb cable is firmly connected
3: if all else fails, maybe you'll have to reinstall ti-connect (sigh, why is ti-connect so retarded >.<)
EDIT:
wait, have you checked if the programs actually did get sent to your calc?
sometimes when i use ti-connect, it gives the second error, but the files have still been sent to my calc
dafuq ti-connect ???
-
1: check if the calculator is turned on when you send the files, because otherwise it won't send
2: otherwise, check if the usb cable is firmly connected
3: if all else fails, maybe you'll have to reinstall ti-connect (sigh, why is ti-connect so retarded >.<)
Had already done 1 and 2 multiples times >-<
Thanks, will reinstall TI-Connect ^_^
-
Another option if TI-Connect still refuses to work is to uninstall it and install TiLP instead.
-
From experience (although I didn't use recent versions of TILP much), only reformating the computer would fix TI-Connect issues and even then that didn't always work. That's how bad TI-Connect is. But it was a good move to try the steps above.
Also, never ever connect the calculator to the computer before TI-Connect is done installing.
-
i tried installing ti-lp, but it didn't work for me, so i installed ti-crapconnect again :/
-
wait, have you checked if the programs actually did get sent to your calc?
sometimes when i use ti-connect, it gives the second error, but the files have still been sent to my calc
dafuq ti-connect ???
I checked "AppVars" in "Mem Mgmt/Del" and the files I was trying to transfer weren't there, so I suppose they didn't. Thanks anyways. ;D
Another option if TI-Connect still refuses to work is to uninstall it and install TiLP instead.
Will try it, thanks.
From experience (although I didn't use recent versions of TILP much), only reformating the computer would fix TI-Connect issues and even then that didn't always work. That's how bad TI-Connect is. But it was a good move to try the steps above.
Also, never ever connect the calculator to the computer before TI-Connect is done installing.
Wow, it always looked kinda suspicious and didn't work really well 100% of the times, but being THAT bad? Jesus.
Thanks for the advice.
EDIT: Installed TiLP and I got the game. Thanks for all the help guys. :thumbsup:
Now I can't figure out the buttons ._.
-
(I just finished writing a post saying basically the same as this, but more info about my situation in TI-84 programs/apps, and when I posted it some error about my IP came up and I lost all I had written that took me at more than 10 minutes. :mad: )
Next time that happens, copy down the code you're given and tell Eeems about it at http://ourl.ca/issue (http://ourl.ca/issue); he should be able to get you sorted out.
-
(I just finished writing a post saying basically the same as this, but more info about my situation in TI-84 programs/apps, and when I posted it some error about my IP came up and I lost all I had written that took me at more than 10 minutes. :mad: )
Next time that happens, copy down the code you're given and tell Eeems about it at http://ourl.ca/issue (http://ourl.ca/issue); he should be able to get you sorted out.
One of us admins will at the very least!
-
Next time that happens, copy down the code you're given and tell Eeems about it at http://ourl.ca/issue (http://ourl.ca/issue); he should be able to get you sorted out.
One of us admins will at the very least!
Unrelated issue, already resolved.
That said, when you encounter issues with the site, please report it via ourl.ca/issue (http://ourl.ca/issue)
-
Now I can't figure out the buttons ._.
Keys are described in the README I added yesterday in the zip, and are almost described in the first post of the dev topic I wrote in August.
Basically, it's arrows,2nd,alpha for P1 and numpad,log,x² for P2.
-
Next time that happens, copy down the code you're given and tell Eeems about it at http://ourl.ca/issue (http://ourl.ca/issue); he should be able to get you sorted out.
One of us admins will at the very least!
Unrelated issue, already resolved.
That said, when you encounter issues with the site, please report it via ourl.ca/issue (http://ourl.ca/issue)
Okay, thanks for the help ^_^
Now I can't figure out the buttons ._.
Keys are described in the README I added yesterday in the zip, and are almost described in the first post of the dev topic I wrote in August.
Basically, it's arrows,2nd,alpha for P1 and numpad,log,x² for P2.
Nice, has the .zip got anything new besides the README?
-
Just update anyways. Glad you got connectivity working :D DJ is exaggerating a bit about PC re-format but yes, TI-Connect can be reeeeally hard to get working. I usually recommend TiLP.
-
Just update anyways. Glad you got connectivity working :D DJ is exaggerating a bit about PC re-format but yes, TI-Connect can be reeeeally hard to get working. I usually recommend TiLP.
Okay, thanks for the suggestion ^^
BIRDIES