Author Topic: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K  (Read 5438 times)

0 Members and 1 Guest are viewing this topic.

Offline DJ Omnimaga

  • Now active at https://codewalr.us
  • CoT Emeritus
  • LV15 Omnimagician (Next: --)
  • *
  • Posts: 55821
  • Rating: +3151/-232
  • CodeWalrus founder & retired Omnimaga founder
    • View Profile
    • DJ Omnimaga Music
Re: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K
« Reply #15 on: November 22, 2013, 01:16:33 am »
Still such a pity that now we have to resort to hardware mods. However, this method is better than nothing!
Better take advantage of that method while it lasts too. Who knows if TI won't go the same route as the Xbox 360 and iOS devices (which can't be opened through regular means). I think that it's possibility, because the HP Prime already does it to a certain extent (there are still screws, but it's incredibly hard to unclip the two parts afterward without bending the circuit board)
« Last Edit: November 22, 2013, 01:17:43 am by DJ Omnimaga »
In case you are wondering where I went, I left Omni back in 2015 to form CodeWalrus due to various reasons explained back then, but I stopped calc dev in 2016 and am now mostly active on the CW Discord server at https://discord.gg/cuZcfcF


Bandcamp|Reverbnation|Facebook|Youtube|Twitter

Offline MrJoker59

  • LV0 Newcomer (Next: 5)
  • Posts: 2
  • Rating: +0/-0
    • View Profile
Re: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K
« Reply #16 on: December 13, 2013, 12:57:01 pm »
Interesting !
Tell us how the process goes :)
I used Google translate to get around the site, it runs quite well! Confirming your registration on their Website is done by SMS (there is an option for email registration but it didn't work for me...)
You can only pay by Credit Card. There is an Option for "Paypal" but that's Google translate mixing up the Chinese equivalent of PayPal, Alipay with the western used PayPal! After that it will automatically register you to Alipay, where, when you are prompted on your profile page, will need to confirm the payment. After that you just have to wait the 3 weeks (depends :)!).

Hi Jawis I need some help to buy the motherboard on the site
EDIT: Found :) http://www.taobao.com/go/act/global/teach/en/index.html
« Last Edit: December 13, 2013, 12:58:35 pm by MrJoker59 »

Offline timwessman

  • LV3 Member (Next: 100)
  • ***
  • Posts: 94
  • Rating: +32/-0
    • View Profile
Re: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K
« Reply #17 on: December 13, 2013, 01:41:38 pm »
because the HP Prime already does it to a certain extent (there are still screws, but it's incredibly hard to unclip the two parts afterward without bending the circuit board)

You know, I take small issue with that. There are 6 screws. Then all you do is run your fingernail (or a plastic wedge tool) around the outside and it pops right open. Sure, the first time you do it it might be a little tricky since it is a totally new device, but it is honestly the easiest calculator to open I've ever tried (and I've opened more then my fair share).
TW

Although I work for the HP calculator group, the comments and opinions I post here are my own.

Offline Legimet

  • LV6 Super Member (Next: 500)
  • ******
  • Posts: 336
  • Rating: +29/-0
    • View Profile
Re: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K
« Reply #18 on: December 13, 2013, 09:20:29 pm »
Idk about the Prime, but I couldn't open my Nspire because it had some weird screws which I couldn't unscrew.

Offline MrJoker59

  • LV0 Newcomer (Next: 5)
  • Posts: 2
  • Rating: +0/-0
    • View Profile
Re: Add 3.1/Ndless compatibility to your TI-Nspire CX HW-J/K
« Reply #19 on: December 14, 2013, 04:51:21 pm »
Can someone help me to unmount my Ti-Nspire CX CAS (J) to replace the motherboard with pictures ?