Author Topic: Need help changing TNO_WOB2 to TNO  (Read 2352 times)

0 Members and 1 Guest are viewing this topic.

Offline Spyro543

  • LV9 Veteran (Next: 1337)
  • *********
  • Posts: 1189
  • Rating: +74/-3
    • View Profile
Need help changing TNO_WOB2 to TNO
« on: June 07, 2011, 06:57:14 pm »
I used TNOC to remove the Boot2 from OS 3.0.1. It outputted a TNO_WOB2 file. I need a TNO, no documentation included with TNOC will help me at all.

Offline Mighty Moose

  • LV4 Regular (Next: 200)
  • ****
  • Posts: 141
  • Rating: +4/-0
    • View Profile
Re: Need help changing TNO_WOB2 to TNO
« Reply #1 on: June 07, 2011, 08:36:57 pm »
Do you have the ability to view and change file extensions?  I'm guessing you do; if so, just change the name from OS3.0.1.TNO_WOB2 to OS3.0.1.TNO and send it to your Nspire.
Cheers!
I beta test, so...yeah.  PM me if you want me to test anything :D.

Almost only counts in horseshoes and handgrenades.

Cogito ergo sum.

Calcs:
TI-84+, OS 2.43, Boot Code 1.02, 128k RAM
TI-84+SE VSC, OS 2.43, Boot Code 1.00, 128k RAM  (I'm spoiled :P)
TI-81, OS 1.6K (only borrowed)
Casio fx-CG10 (Prizm), OS 01.04.0200
TI-Nspire Clickpad, OS 1.4
TI-Nspire Clickpad, OS 3.1.0.392
TI-Nspire CAS Clickpad, OS 1.6.10110 (!?) now OS 3.1.0.392

Offline Spyro543

  • LV9 Veteran (Next: 1337)
  • *********
  • Posts: 1189
  • Rating: +74/-3
    • View Profile
Re: Need help changing TNO_WOB2 to TNO
« Reply #2 on: June 08, 2011, 11:08:01 am »
That was too simple.