Author Topic: TI 83 Plus Black screen  (Read 64563 times)

0 Members and 1 Guest are viewing this topic.

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
TI 83 Plus Black screen
« on: June 26, 2012, 11:07:43 am »
I have a big problem with TI-83 Plus. Suddenly it got black screen without any special reason. I thought the low-contrast screen blinking was due to low batteries but I changed to new ones and it still displays black screen.
I tried everything, holding DEL, CLEAR, removing batteries, backup battery, setting contrast, flashing OS - it didn't work and TILP reports:
"Error writing to the device" and in console: "A device connected is not functioning"
I use Silver Link with properly installed drivers.

Then suddenly, it displayed some garbage for a second, then normal "Ram cleared" message, returned me to normal blinking cursor screen, but it quickly turned back to black screen.

I was googling a lot but I didn't find any solutions. All tips that worked for others don't work for me.
Also, unlike others, I'm not able to turn off my calc. It does react to DEL and ON button, also contrast gets lower when pressing 2nd key, but I can't turn it off.
What should I do?

Offline aeTIos

  • Nonbinary computing specialist
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3915
  • Rating: +184/-32
    • View Profile
    • wank.party
Re: TI 83 Plus Black screen
« Reply #1 on: June 26, 2012, 11:11:05 am »
remove all batteries including backup and let it for a night or so.
What was the last thing you did before the screen went black? (did you drop it or did you run an asm program or something else?)
« Last Edit: June 26, 2012, 11:11:17 am by aeTIos »
I'm not a nerd but I pretend:

Offline Hayleia

  • Programming Absol
  • Coder Of Tomorrow
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3367
  • Rating: +393/-7
    • View Profile
Re: TI 83 Plus Black screen
« Reply #2 on: June 26, 2012, 11:13:04 am »
One of my friend had this problem too with his black 83+. So if your 83+ is black, maybe it is a hardware problem.
Now the stupid question I'll ask seems less stupid: What color is your 83+ ?
I own: 83+ ; 84+SE ; 76.fr ; CX CAS ; Prizm ; 84+CSE
Sorry if I answer with something that seems unrelated, English is not my primary language and I might not have understood well. Sorry if I make English mistakes too.

click here to know where you got your last +1s

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
Re: TI 83 Plus Black screen
« Reply #3 on: June 26, 2012, 11:16:49 am »
@aeTIos: A friend was playing Sokoban. I don't know, given the technical knowledge of my friends, maybe they put something in archive, run Garbage collect which showed up once before, or something else that would screw up RAM/archive... but that should be reset by removing battery/holding CLEAR, isn't it?

@Hayleia: It's black.


Offline TheMachine02

  • LV6 Super Member (Next: 500)
  • ******
  • Posts: 452
  • Rating: +105/-0
  • me = EF99+F41A
    • View Profile
Re: TI 83 Plus Black screen
« Reply #4 on: June 26, 2012, 11:17:42 am »
One of my friend had this problem too with his black 83+. So if your 83+ is black, maybe it is a hardware problem.
Now the stupid question I'll ask seems less stupid: What color is your 83+ ?

yes it happen to one of my friend.

once he crash is calc with an asm prog, and after he turn on, teh screen alternate black and white

it's was a black ti 83+

edit : maybe mem clear ???
« Last Edit: June 26, 2012, 11:18:41 am by TheMachine02 »
AXE/asm programmer - unleash the power of z80 //C++//C

epic 3D things http://www.ntu.edu.sg/home/ehchua/programming/opengl/CG_BasicsTheory.html

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
Re: TI 83 Plus Black screen
« Reply #5 on: June 26, 2012, 11:19:24 am »
I tried mem clear, and full clear too, 2nd, 7, etc.

Offline thepenguin77

  • z80 Assembly Master
  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1594
  • Rating: +823/-5
  • The game in my avatar is bit.ly/p0zPWu
    • View Profile
Re: TI 83 Plus Black screen
« Reply #6 on: June 26, 2012, 11:21:09 am »
Before we start making up new key combinations, I'll refer you here.


My suggestion:
1. Hold DEL while inserting the 4th battery, the boot screen will appear, if this doesn't black out, then you have an OS/Archive related issue.
2. Hold CLEAR while pressing ON, this will boot the calculator without looking in the archive, see if this still blacks out
zStart v1.3.013 9-20-2013 
All of my utilities
TI-Connect Help
You can build a statue out of either 1'x1' blocks or 12'x12' blocks. The 1'x1' blocks will take a lot longer, but the final product is worth it.
       -Runer112

Offline aeTIos

  • Nonbinary computing specialist
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3915
  • Rating: +184/-32
    • View Profile
    • wank.party
Re: TI 83 Plus Black screen
« Reply #7 on: June 26, 2012, 11:23:50 am »
@aeTIos: A friend was playing Sokoban. I don't know, given the technical knowledge of my friends, maybe they put something in archive, run Garbage collect which showed up once before, or something else that would screw up RAM/archive... but that should be reset by removing battery/holding CLEAR, isn't it?
Well things that go wrong in archive can screw up your calc pretty badly.
« Last Edit: June 26, 2012, 11:27:11 am by aeTIos »
I'm not a nerd but I pretend:

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
Re: TI 83 Plus Black screen
« Reply #8 on: June 26, 2012, 11:35:21 am »
@thepenguin:
1) Still leaves me with black screen.
2) Doesn't work. Actually I can't test it properly since I can't turn off calc to turn it on by CLEAR+ON, only when inserting battery, but it doesn't change anything. MODE+battery also leaves me with black screen.

@aeTIos:
So what's the solution?

As I said, once, while testing all random combinations, it actually displayed "RAM cleared" but it quickly returned to black screen.

Offline aeTIos

  • Nonbinary computing specialist
  • LV12 Extreme Poster (Next: 5000)
  • ************
  • Posts: 3915
  • Rating: +184/-32
    • View Profile
    • wank.party
Re: TI 83 Plus Black screen
« Reply #9 on: June 26, 2012, 11:36:43 am »
Blagus, wiping the WHOLE memory, including OS. Which I don't know a way for, sadly. (that is, w/o connectivity or input)
« Last Edit: June 26, 2012, 11:37:16 am by aeTIos »
I'm not a nerd but I pretend:

Offline thepenguin77

  • z80 Assembly Master
  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1594
  • Rating: +823/-5
  • The game in my avatar is bit.ly/p0zPWu
    • View Profile
Re: TI 83 Plus Black screen
« Reply #10 on: June 26, 2012, 11:55:34 am »
So blagus, when you did the battery + DEL, did you see the boot code "Waiting..." message? Because if you did, then you clearly have a hardware issue. The only thing you could do in this situation is what was suggested above which is to leave all 5 batteries out for a while.
zStart v1.3.013 9-20-2013 
All of my utilities
TI-Connect Help
You can build a statue out of either 1'x1' blocks or 12'x12' blocks. The 1'x1' blocks will take a lot longer, but the final product is worth it.
       -Runer112

Offline parserp

  • Hero Extraordinaire
  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1455
  • Rating: +88/-7
  • The King Has Returned
    • View Profile
Re: TI 83 Plus Black screen
« Reply #11 on: June 26, 2012, 01:00:29 pm »
Before we start making up new key combinations, I'll refer you here.
That is one amazing list O.O
I didn't even know some of that stuff even existed

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
Re: TI 83 Plus Black screen
« Reply #12 on: June 26, 2012, 03:09:49 pm »
So blagus, when you did the battery + DEL, did you see the boot code "Waiting..." message? Because if you did, then you clearly have a hardware issue. The only thing you could do in this situation is what was suggested above which is to leave all 5 batteries out for a while.

As I said, that combination still gives me black screen. None of combinations give me anything but full black screen, or slowly contrast-increasing black screen.

It was only one random occurrence when I got normal display, and I can't get to it anymore.

I guess it's a hardware issue, but which one?

Offline Blagus

  • LV2 Member (Next: 40)
  • **
  • Posts: 29
  • Rating: +1/-0
    • View Profile
Re: TI 83 Plus Black screen
« Reply #13 on: June 26, 2012, 03:19:05 pm »
This is the error when I boot in DEL+battery mode, screen black, and try to flash OS via TiLP2:

(tilp.exe:2288): ticables-WARNING **: usb_bulk_write (libusb0-dll:err [_usb_reap_async] reaping request failed, win error: A device attached to the system is not functioning.

And error message box:
Msg: error occured while writing to the device.

Offline thepenguin77

  • z80 Assembly Master
  • LV10 31337 u53r (Next: 2000)
  • **********
  • Posts: 1594
  • Rating: +823/-5
  • The game in my avatar is bit.ly/p0zPWu
    • View Profile
Re: TI 83 Plus Black screen
« Reply #14 on: June 26, 2012, 03:47:51 pm »
Ok, so an easy way to determine what the calculator is doing when the screen is off is to press some buttons.

Boot into the calculator with battery+DEL and then:
1. Press any button besides ON - if the screen turns off, then the boot code is immediately throwing a link error
2. Press ON, then press any button besides ON - if the screen turns off, then the boot code is indeed waiting to receive an OS
3. If no amount of button mashing can get the screen to turn off, then you've got some serious problems (or you incorrectly entered battery+DEL)
zStart v1.3.013 9-20-2013 
All of my utilities
TI-Connect Help
You can build a statue out of either 1'x1' blocks or 12'x12' blocks. The 1'x1' blocks will take a lot longer, but the final product is worth it.
       -Runer112